News

Home page

There are several ways to start diesel generators, which are they

Release time:

2023-08-18 15:50

Speaking of the diesel generator set to start the way, I believe that many people and Xiaobian, are aware of the way is not to start on the line?

1. Hand-pull start: Hand-pull start is a manual start method. You need to manually pull the start handle to rotate the crankshaft, and then drive the flywheel and diesel engine to start.

2. Battery start: Battery start is the way to use the battery and motor to start the diesel generator. The battery needs to be pre-charged and then wired to the motor, which drives the diesel generator to start.

3. Compressed air start: Compressed air start is a way to rotate the crankshaft through compressed air, thereby driving the flywheel and diesel engine to start. This method usually needs to be used in conjunction with the battery starting method.

Automatic start: Automatic start is one of the most common starting methods for diesel generators. In the automatic starting mode, the diesel generator can be automatically started according to the set starting program.

5. Parallel starter start: Parallel starter start is a starting method for large diesel generator sets. It uses parallel starter to help start the diesel generator.

Gas turbine start-up: Gas turbine start-up is a way of using a gas turbine engine to start a diesel generator. The gas turbine engine generates gas by burning natural gas or petroleum gas, which drives the turbine to rotate, and then drives the diesel generator to start.

The above are some common diesel generator starting methods, each of which has its own characteristics and usage scenarios. When choosing the starting method of the diesel generator, it is necessary to choose according to the actual situation and demand.

Since the current base station oil machine is not intelligent, the oil machine power generation is managed by human, and the oil machine operation information depends on human feedback. In particular, high mountain stations and remote stations meet with rain, snow and hail every year. Due to the difficulty of supervision, the oil engine is not in place and the power generation is not timely. The base station is seriously retired and the indicator is declining. It is usually when the mains power is abnormal that we rush to generate electricity. Sometimes it is found that the oil machine cannot operate normally (oil machine failure, generator failure, battery failure, no oil in the oil tank, etc.).

Hardware advantages of remote control generator set control box

In order to cope with the harsh environment of high mountain remote base station mains, professional customized charger is adopted with voltage resistance grade of 300V

What are the components of a remote control generator set?

1. Electric starter generator. 2. Automatic control collector. 3. Wireless communication module. 4. Internet of Things card. 5. Background server. 6. Rectifier charger. 7 Current transformer. 8. Electronic damper controller. 9. Mobile phone end. 10. Control lines.

On the Transformation Scheme of Ordinary Electric Starting Oil Machine

Modification materials: 1. One ordinary electric starter generator (manual modification cost is too high, it is not recommended to change);2. One control box 3. Optimize one connection line (with integrated control box) 4. Gasoline version with damper stepper motor carburetor/diesel version solenoid valve oil pump. 5. One oil level meter

Installation and use method of remote control generator set

The oil lubrication added by the diesel pump is: SAE15W-40 or 20W-50 grade diesel engine oil. The diesel pump should use high-quality diesel engine oil to ensure the normal operation of the machine. In addition to adding oil to the diesel engine, the fuel injection pump also needs to add special oil according to the designed lubrication, and the linked shared engine oil. Diesel pump is a kind of mechanical and electrical integration equipment which is directly driven by diesel engine and can start and realize water supply in a short time. Diesel pump is a high-tech product integrating microelectronics technology, digital technology, computer technology, information processing technology, industrial automation control technology, communication technology and mechanical technology.

What is a dual-purpose machine for power generation and electric welding, and what should be paid attention to when welding?

Power generation and electric welding dual-purpose machine | uses diesel engine or gasoline engine as power to rotate and generate electricity, and provides direct current for electric welding through rectifier module. Also called power generation welding dual-purpose machine, can be used as a generator, but also can be used as a welding machine. Advantages: integrated power generation and electric welding, light weight and convenient movement.

Return

An enterprise mainly engaged in R & D, production and sales of gasoline and diesel generator power, generator set, power generation welding dual-purpose unit, gasoline and diesel water pump, etc.

Tel: 0086-23-68936905

Tel: 0086-23-63621727

Email: Holfill@cqfwtj.com

Office address: 8-1, No. 106 Cuibai Road, Chunhui Road Street, dadukou district, Chongqing (Chongqing Micro-enterprise Dream Factory)

Factory address: Luohuang Industrial Park B, Jiangjin District, Chongqing

Mobile website

Business License